An Easy DIY Approach to Have a Clean and Safe Roof

If you want to keep your roof in a good condition, then you can opt for rubber roof. Below is a comprehensive overview of how to maintain your roof well.

The roof of our house is very crucial. Besides, it is also exposed to hostile weather conditions. Hence, it is very necessary that you take care and maintain your roof well. For instance, if you find a leaking roof then you should at once take measures to repair it. Let us take a look at the following steps to repair roof.

Step 1 – Repair the Shingles – You first need to find out, where from the roof is leaking. These areas are often very minute and hence, it needs special attention.

Step 2 – Your next task is to straighten those shingles which have curled. Here you must prevent exposing the shingle to excess heat, because it damages the shingles.

Step 3 – The edges of your roof which are exposed to critical weather must be covered with asphalt cement, especially meant for roofs. The shingles that have damaged, replace them.

Step 4 – Roll Roofing –cracks can also be there in roofs; you can inspect and mend them. Using roofing cement is important in this regard.

Step 5 – It is also important to supervise the vent of chimney pipes. Additionally you can also use a hammer and trim the nail ends.

You might also want to install a different roof from the one existing. For this, you have to first remove the existing surface. Your next step is to spread your selected rubber membrane. This is followed by applying adhesive which is meant for Rubber Roofing in particular. The final step is to roll the remaining portion of the rubber membrane. It is important to note that for next 3 days it must not be in contact with water. Hence, you must take appropriate measures to prevent it.

After you have installed the rubber roof, your next concern should be how to clean the roof.

You can follow these steps:

1.    At least for 5 times in a year, you must make sure that you clean your roof.
2.    It is very important to supervise the roof regularly.
3.    You can use a cleaner recommended by Local Rubber roofing specialists from your area to clean the roof
4.    You can also sweep the roof surface to remove dirt and grime and use a sponge mop.
5.    Apply a sealant if you find any cracks on the roof surface.

Related Post:
Maintain Your Rubber Roof by Yourself - Quick Tips